Stator for Scooter Moped Go Kart GY6 50 cc / QMB139 Engines - 8 Coils / 4 Wires

Description

STATOR FOR SCOOTER MOPED GO KART GY6 50 CC / QMB139 ENGINES - 8 COILS / 4 WIRES
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
Brand new aftermarket stator
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation
Highest grade lamination materials
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included
Connector included
Rubber grommet included
All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
VEHICLE MODELS FITMENT
Scooter GY6 50cc 4 Stroke -- 0
Scooter QMB139 Engine -- 0
OEM PART REPLACEMENT
RMS010-102442
SPECIFICATIONS
Dimensions :
Interior diameter : 28 mm
Exterior diameter : 88 mm
Thickness : 10 mm
Length of wires stator to grommet : 160 mm
Length of wires grommet to plug : 380 mm
Length of pickup coil's wire to grommet : 130 mm
Other specifications :
Number of wires : 4
Number of plugs : 2
Number of pins : 4
Wire to wire resistance :
Alternator :Yellow to White = 0.5 ohms +-20%
Pickup : Blue/White To White = 0.5 ohms +-20%
Source : Black/Red to Ground = 330 ohms +-20%
INSTRUCTIONS
Before installing your new stator
Check the AC output of the stator
Replace any burned or corroded connectors on stator and regulatorrectifier
Check and repair any melted wiring
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
ITEM DELIVERY
Our multiple North American locations, from which we ship our products, allows us to deliver 99.7% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.
If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.