Keyence FS-N11P Fiber Optic Sensor Amplifier

Description

FS-N11P
Type
Standard 1 output
Cable
Output
PNP
Main unit/expansion unit
Main unit
Control output
1
PNP open collector 24 V; 1 output max: 100 mA or less; 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or less
External input
-
Response time
50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
Multiple connections to Expansion units
Up to 16 units can be connected total (two output type is treated as two units)
Light source LED
Red, 4-element LED
APC
ON/OFF switchable (Factory setting: OFF)
Number of interference prevention units
0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA
(When set to double, the number of interference-prevention units will be doubled.)
Rating
Power voltage
12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current Consumption
Normal: 950 mW or less (39 mA max. at 24 V, 52 mA max. at 12 V)
*1
Eco on mode: 850 mW or less (35 mA max. at 24 V, 44 mA max. at 12 V)
*1
Eco Full mode: 520 mW or less (21 mA max. at 24 V, 26 mA max. at 12 V)
Environmental resistance
Ambient light
Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less
Ambient temperature
-20 to +55 °C
-4 to +131 °F
(No freezing)
*2
Relative humidity
35 to 85 % RH (No condensation)
Vibration resistance
10 to 55 Hz, Double amplitude 1.5 mm
0.06"
, 2 hours in each of the X, Y, and Z directions
Shock resistance
500 m/s
2
, 3 times in each of the X, Y, and Z directions
Case material
Both main unit and expansion unit housing material: Polycarbonate
Weight
Approx. 75 g